Product Details:
Minimum Order Quantity | 1 Piece |
Weight | 11g / 0.39oz |
Power Interface | Mini USB Interface |
Supply Voltage | DC 5V |
Audio Jack | 3.5mm |
Applicable Impedance | 4-8 ohm |
PCB Board Size | 50 * 40mm / 1.97 * 1.57in |
Model Number | GXG-1987 |
Audio Input | Bluetooth V2.1 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Model Name/Number | DC mini mp3 module |
Application | GPS based navigation voice broadcast, For producing Warning alarm as voice, etc. |
Supported sampling rates (kHz) | 8/11.025/12/16/22.05/24/32/44.1/48. |
Audio output right channel | Drive earphone and amplifier |
Audio output left channel | Drive earphone and amplifier |
Ground | Power GND |
The DF Player Mini MP3 Player is a small and low-price MP3 module with a simplified output directly to the speaker. The module can be used as a standalone module with attached battery, speaker and push buttons or used in combination with an Arduino or any other with RX/TX capabilities.
Additional Information:
Product Details:
Part Number | FN-BC04 |
Audio format | MP3 and WAV |
Working voltage | DC 8V-24V |
Working current | <= 400mA (Input: DC12V) |
Power Consumption | <= 10W |
On-board flash memory size | 4MB |
Product Details:
Operating Temperature | -40-85 Deg C |
Rated Current | 20-250MA(with load) |
Voltage of IO Port | 3.3V TTL level |
Dimensions | 37 x 18 x 2. 7 mm |
Humidity | 5%-95% RH |
USB Port | USB2.0 |
Working Voltage | DC3.3-5V |
FN-RM01 is a high-quality MP3 audio recorder and player module, Flexible audio recording modes including MIC recording, Line-in recording and stereo 2-channel Aux-in recording, optional audio recording bit rates, multiple formats of audio files playback supported including MP3, WAV and WMA, and as well as simple communication control modes are the main advantages of this module, which can meet kinds of needs from customers.
Features:
Product Details:
Operating Temperature | -40~+80 Deg C |
USB Port | Standard USB 2.0 |
UART Port | Standard serial port and TTL level |
Working Voltage | DC3.3~5.0V; TypicalDC4.2V |
Rated Current | <15mA(without USB flash drive) |
Humidity | 5% ~95% |
FN-M16P is a small and low price MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
Features:
Product Details:
Input Voltage | 3.3V-5V(5V is typical,and it's better to serially connect a diode) |
Working Temperature | -40~+80 Deg C |
Humidity | 5% ~ 95% RH |
USB port | Standard USB 2.0 |
UART port | Standard serial port and TTL level |
Rated Current | 10 mA(quiescent) |
Low Consumption Current | < 200 uA |
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Cellular phones, PDAs, Toys, Other battery-powered products, Can be used in Arduino, Maple, ChipKit, STM32, ARM, DSP, FPGA platforms |
Size | 1/6 inch |
Connector | Standard 0.1inch (2.54mm) pin pitch header connector |
Onboard regulator | Only single 3.3V supply needed |
Resolution | 640x480 VGA |
Lens | Mounted with high quality F1.8 / 6mm lens |
Features:
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Color | Black |
Additional Information: