Raspberry PI Board And Acceseories

Product Details:

Raspberry Pi Model B Expansion / Evaluation Board is an expansion board designed for Raspberry Pi Model B+, integrates various components and interfaces for connecting external accessory boards. It's ideal for Raspberry Pi Model B+ evaluation and development.

Features:

• Pinheaders for connecting with the RPi
• UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART, etc.
• 8I/Os interface: easily connects to modules controlled by I/Os, such as 8 Push Buttons, Logic Level Converter, Mix Board, etc.
• SPI interface: easily connects to SPI modules such as AT45DBXX Dataflash, L3G4200D Board, etc.
• I2C interface: easily connects to I2C modules such as PCF8574 Expansion Board, PCF8563 RTC Board, LSM303DLHC Board, etc.
• Character LCD interface: for connecting character LCDs like LCD1602
• USB connector: USB TO UART, supported by onboard converter CP2102
• Power indicator
• User LEDs
• User Keys
• Potentiometer: for LCD1602 contrast adjustment
• RTC battery holder
• PCF8563: onboard RTC chip
• 32.768K crystal: RTC crystal
• CP2102: onboard USB TO UART chip, for debugging
• CP2102 jumper
• RTC jumper
• User LEDs jumper
• User Keys jumper

Note: For jumpers above:

• short the jumper to connect to I/Os used in example code
• open the jumper to connect to other custom pins via jumper wires

Product Details:

Details:

• Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• 1GB, 2GB or 4GB LPDDR4-3200 SDRAM (depending on model)
• 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
• 2 USB 3.0 ports; 2 USB 2.0 ports.
• 2 × micro-HDMI ports (up to 4kp60 supported)
• 2-lane MIPI DSI display port / CSI camera port
• 4-pole stereo audio and composite video port
• H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
• OpenGL ES 3.0 graphics
• Micro-SD card slot for loading operating system and data storage

Product Details:

Raspberry Pi 3 Model B - 1.2GHz Quad-Core, 1GB Ram, inbuilt WiFi & Bluetooth.

For Raspberry Pi 3, Broadcom have supported us with a new SoC, BCM2837. This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so all those projects and tutorials which rely on the precise details of the Raspberry Pi hardware will continue to work. The 900MHz 32-bit quad-core ARM Cortex-A7 CPU complex has been replaced by a custom-hardened 1.2GHz 64-bit quad-core ARM Cortex-A53. Combining a 33% increase in clock speed with various architectural enhancements, this provides a 50-60% increase in performance in 32-bit mode versus Raspberry Pi 2, or roughly a factor of ten over the original Raspberry Pi.

• A 1.2GHz 64-bit quad-core ARM Cortex-A53 CPU (~10x the performance of Raspberry Pi 1)
• Integrated 802.11n wireless LAN and Bluetooth 4.1
• Complete compatibility with Raspberry Pi 1 and 2.

Product Details:

Features

• 800×480 high resolution
• Capacitive touch control
• Supports Raspberry Pi
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image

For other mini-PCs, driver is required and should be developed by users

• Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption

For revisions under Rev2.1:

• For the Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
• When work as a computer monitor, touch function is unavailable

Note :

• Drivers can be added to your current system to support LCD display and touch control.
• Images CAN NOT be used with your current system. They''re stand-alone systems which support LCD display and touch control already.

Product Details:

10.1inch HDMI LCD Touch Display (with Case)

The LCD and Control Board

• IPS screen,1280×800 high resolution
• Capacitive touch control, supports up to ten-points touch
• When works with Raspberry Pi, supports Raspbian, Ubuntu, Windows 10 IoT, single touch, and driver free
• When work as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free
• Supports Banana Pi, Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption

The Case

• Comes with back holder, 30/45 tilt angle
• Features mounting holes for Raspberry Pi 3B/2B/B+/A+/B, BB Black, Banana Pi

Product Details:

This fantastic 5 inch HDMI LCD display with USB touch screen is compatible with almost all the operating systems on the market. Utilizing pre-existing Linux/Windows/Mac drivers, this 800 x 480 touch screen will help you hit the ground running. Resistive touch function gives the user full control over any device. It supports Windows XP SP3, Windows 7, Windows 8, Windows 8.1, Windows 10, Android 4.2, Windows CE7, Ubuntu and Debian. With the built-in EDID device information, your equipment will get identified in no time. Meanwhile, its USB touch can fulfill the functions of the right mouse button and drag and drop.

With the special design power circuit for this display, it requires less than 150mA current to get it running with perfect performance. When you do not need the touch screen function, all you need is to plug a HDMI line to get it work. We have successfully run the tests on PC, laptop, Raspberry Pi, Beaglebone Black, Udoo, Compute stick, SLR camera.

Features:

• USB Resistive Touch Control
• Plug and Play! No Driver Needed!
• Compatible with Raspbian, Ubuntu Mate, NOOBS with Raspberry Pi
• Compatible with Debian, Angstrom with BeagleBone Black
• Compatible with Windows/Ubuntu/Mac with PC
• Intel-Processor Base MiniPC Supports
• Ultra Low Power Consumption Backlight

Package Includes:

• 1x5 Inch HDMI Touch Screen Display
• 1x Black Touch Pen

Technology Support:

When you use this display with a Raspberry Pi, please edit config.txt to set the HDMI to the native 800x480 in case it doesn''t detect the resolution properly. The easiest way to edit the config.txt is to put the Pi TF card into an everyday computer and edit config.txt with any text editor. Save it and it is ready to rock.

Product Details:

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT

The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.

The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range.

• Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
• 1GB LPDDR2 SDRAM
• 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
• Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
• Extended 40-pin GPIO header
• Full-size HDMI
• 4 USB 2.0 ports
• CSI camera port for connecting a Raspberry Pi camera
• DSI display port for connecting a Raspberry Pi touchscreen display
• 4-pole stereo output and composite video port
• Micro SD port for loading your operating system and storing data
• 5V/2.5A DC power input
• Power-over-Ethernet (PoE) support (requires separate PoE HAT)

Product Details:

The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following key features:

• RP2040 microcontroller with 2MByte Flash 
• Micro-USB B port for power and data (and for reprogramming the Flash) 
• 40 pin 21x51 ''DIP'' style 1mm thick PCB with 0.1" through-hole pins also with edge castellations 
• 3-pin ARM Serial Wire Debug (SWD) port 
• Simple yet highly flexible power supply architecture 
• High quality, low cost, high availability 
• Comprehensive SDK, software examples and documentation for full details of the RP2040 microcontroller please see the RP2040 Datasheet, however the headline features are: 
• Dual-core cortex M0+ at up to 133MHz 
• 264K multi-bank high performance SRAM 
• External Quad-SPI Flash with eXecute In Place (XIP)
• High performance full-crossbar bus fabric 
• On-board USB1.1 (device or host) 
• 30 multi-function General Purpose IO (4 can be used for ADC) 
• 12-bit 500ksps Analogue to Digital Converter (ADC) 
• Various digital peripherals 
• Dual Programmable IO (PIO) peripherals 

Additional Information:

• Item Code: rpi-pico

Product Details:

HDMI to HDMI Cable to Connect Raspberry Pi to a TV. Cable.

• The official Raspberry Pi HDMI cable has been engineered to maxim-ise the performance and functionality of your Raspberry Pi 3. (Backward compatible with all previous generations of Raspberry Pi).
• Triple layer shielding allows you to get the best performance from your Wi-Fi and Bluetooth connectivity with your Raspberry Pi 3.
• Different cable options to suit your project -Choose between 1M & 2M cable lengths in either Black or White. Meets the very latest HDMI Ver-sion 2.0 standards.

Product Details:

3.2 inch Resistive Touch Screen TFT LCD Designed for Raspberry Pi

Key Parameters:

• Colors: 65536
• Backlight: LED
• Power Consumption: TBD
• Backlight Current: TBD
• Operating Temp. (???): TBD

Product Details:

The Raspberry Pi 3 case 

• All primary ports (including microSD) accessible
• Snug and secure fit protects your Pi while looking great!
• Anti-slip feet keep your Raspberry Pi stable
• Power and activity lights still visible through the end of the case

Product Details:

The Prototype development module is designed specifically for the Raspberry Pi. The module suitable enthusiasts and user can weld peripheral to the module;The module expand some amphenol connector and some SMT, so the user can finish prototype test easily.

 

Feature:

• Expand common GPIO through amphenol connector
• Expand common GPIO through Female Header Connector
• Set aside a large amount of welding hole

 

Port:

• I2C amphenol connector
• Female Header Connector
• SPI amphenol connector
• SPI Female Header Connector
• Serial port amphenol connector
• Serial port Female Header Connector
• 3.3V Vcc
• 5V Vcc

 

Product Parameters:

• 3.5mm Amphenol Connector
• 2.54mm Female Header Connector

 

Typical Application:

• Hardware weld primer
• Prototype experiment
• DIY enthusiasts

 

How to use:

Insert the Prototype development module to Raspberry Pi, Pay attention dont make the direction reversed! The correct direction of insert module is above the Raspberry Pis PCB.