RFID NFC Reader Writer

Product Details:

This RFID Reader & Writer 13.56MHz - Uart Interface is integrated with 8bit microcontroller, analog and digital signal processor and necessary passive components on both top layer to complete a fully Functional Read/Write Module. This is a compact 13.56MHz RFID Read / Write Module Designed For IS014443A standard and Support 1k, 4k Transponders. It is controlled by external device over Uart with simple protocols defined in Datasheet.

Special Features:

• Complete Read/Write module with built-in transceiver antenna
• Auto checks for presence of a tag
• Contactless operating frequency 13.56 MHz
• Supports ISO14443A, 1K,4K TK4100 cards.
• TTL RS232 Interface, baud rate19200bps
• Fast data transfer Contactless communication up to 106KHz
• Secure Encrypted contactless communication
• Ideal for emoney,secure access and fast data collection applications
• Watchdog timer
• 1 LED indicator
• Unique serial number on each device

Additional Information:

• Item Code: RFID-READ-WRITE-MODULE

Product Details:

This is a basic VLF RFID Clamshell Card/Tag used for presence sensing, Aceess Control etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not re-programmable. Card is blank, smooth, and mildly flexible.

 

RFID Clamshell Card (125kHz) Features:

• EM4001 ISO based RFID IC
• 125kHz Carrier
• 2kbps ASK
• Manchester encoding
• 32-bit unique ID
• 64-bit data stream [Header ID Data Parity]

Additional Information:

• Item Code: RFID-125KHz

Product Details:

RDM6300 125KHz cardreader mini-module is designed for reading code from 125KHz card compatible read-only tags and read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.

Features:

• Support external antenna
• Maximum effective distance up to 150mm
• Less than 100ms decoding time
• Uart interface
• Support EM4100 compatible read only or read/write tags
• Small outline design

Product Details:

Special Features:

• RFID Read/Write module Base on RC522 and with built-in transceiver antenna
• Auto checks for presence of tags and output interrupt information
• Auto read/write data from RFID tag
• Auto increment/decrement value when reading card
• Easy LOCK/UNLOCK function to protect RFID information
• Encrypted EEPROM to store configured data and up to 40 groups of keys
• Contactless operating frequency 13.56 MHz
• Supports ISO14443A Ultralight,NTAG NTAG203/213
• RS232 Interface, baud rate up to 230400bps
• Fast data transfer Contactless communication up to 106KHz
• Secure Encrypted contactless communication
• Watchdog timer
• 1 LED indicator, 3 programmable I/O pins
• Internal self test

Product Details:

RC522 is a highly integrated read and write 13.56MHz contact-less communication card chip, for applications of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable hand-held devices. The RC522 use of advanced modulation and demodulation concept completely integrated in all types of passive contact-less communication methods and protocols. 14443A compatible transponder signals. It can handle the ISO14443A frames and error detection. In addition, it support rapid CRYPTO1 encryption algorithm, terminology validation products. RC522 support series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s.

Specifications:

• Peak current: <30mA
• Environmental Storage Temperature: -40-85 degrees Celsius
• Relative humidity: relative humidity 5% -95%

Libraries:

• Arduino Library
• Raspberry Pi Python Library

Examples:

• RFID on the arduino with the 522-AN module
• Arduino Uno with RFID RC522

Product Details:

The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz with an easy-to-use firmware for the different supported modes and the required host controller interfaces.

It works as RFID reader/writer,1443-A card or a virtual card and also supports NFC with Android phone. It is also compatible with Arduino.

Additional Information:

• Item Code: PN532-NFC-Reader-MODULE

Product Details:

Specification:

• Strike the digit keyboard for you when it sniffing the tag!
• Adaptable 4 and 7 bytes UID for RFID/NFC chip
• Scan the UID and result same with NFC phone
• No Programming Required!
• No Software Required!
• Just Plug and Play!

Applications:

• Employee identification
• Time and attendance
• Form filter to existing software applications
• Library, Hoteling, meeting attendance, visitor attendance
• Secure printing
• Point of sale
• Membership applications

Product Details:

This is the new Micro usb NFC Reader, Model No. ER200L, which can Adaptable 4 and 7 bytes UID for RFID/NFC chip,Scan the UID and result same with NFC phone.

Product Details:

Special: Strike the digit keyboard for you when it sniffing the tag.

• Read UID.
• No Programming Required.
• No Software Required.
• Just Plug and Play.

Applications:

• Employee identification

• Time and attendance
• Form filter to existing software applications
• Library, Hoteling, meeting attendance, visitor attendance
• Secure printing
• Point of sale

• Membership applications

Product Details:

Special: ·

• Output 10 digits Card serial number, UID only
• Micro USB Connector
• No OTG converter for pad anymore
• Ideal for android pad
• More sensitivity than U disk reader
• No driver Required
• Just Plug and Play

Applications:

• Employee identification
• Time and attendance
• Form filter to existing software applications
• Library, Hoteling, meeting attendance, visitor attendance
• Secure printing
• Point of sale
• Membership applications