GSM, GPS, GPRS Modules & Accessories

Product Details:

The NEO-8M TTL Module is a Global Navigation Satellite System (GNSS) receiver module that is widely used in a variety of GPS-based applications. This module utilizes the u-blox NEO-8M GPS chipset and provides accurate location data by receiving signals from GPS satellites. The TTL version of this module provides a simpler interface for communication with microcontrollers, making it suitable for use in various embedded systems, robotics, navigation, and location-based projects.

Key Features:

1. u-blox NEO-8M Chipset:

   • The module is based on the NEO-8M chipset from u-blox, a leading provider of GNSS solutions. This chipset supports GPS, GLONASS, and other GNSS systems, offering high precision and reliability.

2. TTL Interface:

   • The NEO-8M TTL module communicates with microcontrollers via TTL (Transistor-Transistor Logic) level signals, making it easy to interface with common microcontrollers such as Arduino and Raspberry Pi. It provides both TX (Transmit) and RX (Receive) pins for data communication.

3. High Accuracy:

   • The NEO-8M module provides an accuracy of up to 2.5 meters under open sky conditions, which is typical for consumer-grade GPS receivers. This makes it suitable for applications requiring precise location data.

4. Fast Position Fix:

   • The module supports Hot Start, Warm Start, and Cold Start operation modes. Under optimal conditions, it can achieve a quick position fix, making it suitable for real-time tracking systems.

5. Low Power Consumption:

   • The NEO-8M module is designed to operate with low power consumption, which is ideal for battery-powered applications. It is efficient enough for use in portable devices and systems where power is a concern.

6. Multiple GNSS Support:

   • The module supports not just GPS, but also GLONASS, BeiDou, and QZSS, enhancing its global coverage and robustness in challenging environments.

7. Output Data Formats:

   • The module provides location data in standard formats such as NMEA (National Marine Electronics Association) and UBX (u-blox proprietary protocol), allowing for flexible integration into various systems. It can output data such as latitude, longitude, altitude, speed, and time.

8. Compact and Lightweight:

   • The NEO-8M TTL module is small and lightweight, making it suitable for use in space-constrained applications such as drones, robots, or portable tracking devices.

9. External Antenna Option:

   • Some versions of the NEO-8M module allow for an external antenna, which can improve signal reception, especially in environments with poor satellite visibility, such as urban canyons or indoors.

Applications:

1. GPS Navigation:

   • The NEO-8M module is commonly used in navigation systems for vehicles, boats, or other transportation devices. It can provide real-time location data for route planning and tracking.

2. Robotics:

   • In robotics, the module can be used for outdoor navigation, autonomous vehicles, or drones that require accurate positioning and location tracking.

3. Personal Tracking Systems:

   • The NEO-8M is often used in personal tracking devices such as GPS watches, pet trackers, or wearable tracking systems, where compact size and low power are essential.

Product Details:

The SIM800L module supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission. The SIM800L communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands. It also has built-in level translation, so it can work with microcontroller of higher voltage than 2.8V default. Besides, the board also supports A-GPS technique which is called mobile positioning and gets position by mobile network. This features make it can also be a tracker module.

Features:

• GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
• GPRS mobile station class B
• Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
• Supports Real Time Clock
• Supports A-GPS
• Supports 3.0V to 5.0V logic level
• Low power consumption, 1mA in sleep mode
• Micro SIM Card

Product Details:

blox NEO-6M GPS Module Aircraft Flight Controller Arduino MWC IMU APM2 projects robots NEW

Ublox / u-blox NEO-6M GPS module with antenna and build-in EEPROM

This module is compatible with APM2 and APM2.5, and EEPROM can save all your configuration data.

Features:

• Ublox NEO-6M-0001 GPS Module
• Come with ceramic antenna.
• Use the USART TTL or IIC serial for communication.
• With IIC serial interface
• Serial port baud rate default: 9600,4800 and 38400 optional,NMEA communication protocol.
• Compatible with a variety of flight control such Rabbit,MWC or Pirate FC.

Product Details:

Details:

• Our product is highly appreciated by our customers all over the india for the quality we offers.

Product Details:

The NEO-7M TTL GPS Module is a compact GPS receiver module based on the u-blox NEO-7M chip, designed for integration into various electronic projects requiring GPS functionality. It offers a reliable solution for applications such as robotics, vehicle tracking, and time synchronization.

Product Details:

SIM800C is a complete Quad-band GSM/GPRS solution in a SMT type, which can be embedded in the customer applications. SIM800C supports, it can transmit Voice, SMS and data information with low power consumption. It can smoothly fit into slim and compact demands of customer design.

Features:

• Communications module type:GSM/Bluetooth
• Standard :2G
• Module output power:1 W (class 1 @ 1800/1900MHz), 2W (class 4 @ GSM850/EGSM900)

Specifications for GPRS Data:

• GPRS class 12: max. 85.6 kbps (downlink/uplink)
• PBCCH support
• Coding schemes CS 1, 2, 3, 4
• PPP-stack
• USSD

Interface:

• 42SMTpins including
• Analog audio interface
• RTC backup
• USB interface
• Serial interface
• Interface to external SIM 3V/1.8V
• GPIO
• ADC
• GSM Antenna pad

Product Details:

M590 pure-data Communication Module is an ultra compact GSM/GPRS industrial wireless module, optional Dual-band or Quad-band. It provides a high-quality SMS, GPRS data connection for use in industrial and commercial fields.

 

Neoway M590 module adopts 21-pin LCC encapsulation and its dimensions are 27.6 mm x 21.6 mm x 2.6 mm. It provides customers the following hardware resources:

• UART interfaces, used for data communication, firmware updating and commissioning
• 10-bit ADC input, voltage ranging from 0 V to 2.8 V
• Adapting to 1.8 V and 3.0V SIM card
• Supporting RING/LIGHT/DTR (sleep mode) functions
• Supporting time updating 

Additional Information:

• Item Code: neoway-M590-GPRS

Product Details:

The GSM Module A6 is a compact and efficient module designed for wireless communication using the GSM/GPRS network. Developed for embedded systems, it supports applications requiring SMS, voice calls, and data connectivity. Its small size and low power consumption make it ideal for IoT devices, telemetry systems, and automation projects.

Features of the A6 GSM Module

1. GSM and GPRS Support: It operates on GSM quad-band frequencies (850/900/1800/1900 MHz), making it globally compatible with most cellular networks.
2. Data Transmission: The module supports GPRS data transmission with speeds of up to 85.6 kbps, suitable for basic internet-based applications.
3. SMS Support: Enables sending and receiving SMS messages, making it useful for notification and alert systems.
4. Voice Communication: Supports voice call functionality with a built-in microphone and speaker interface.
5. Low Power Consumption: Designed for energy-efficient applications, with sleep modes to conserve battery life.
6. Compact Design: Small dimensions make it easy to integrate into space-constrained projects.
7. AT Command Interface: Configurable using standard AT commands over UART, simplifying integration with microcontrollers.
8. UART Interface: Communicates with devices through a serial interface, with configurable baud rates.
9. SIM Card Slot: Includes a built-in SIM card holder for direct insertion of a standard SIM card.
10. Voltage Range: Operates on a wide voltage range of 3.3V to 4.2V, with onboard regulation for safe operation.

Technical Specifications

• Frequency Bands: GSM Quad-band (850/900/1800/1900 MHz).
• GPRS Class: Class 12.
• Output Power:
  • 2W @ 850/900 MHz.
  • 1W @ 1800/1900 MHz.
• Power Supply: 3.3V–4.2V (with peak current up to 2A).
• Data Rate: Up to 85.6 kbps for GPRS.
• Interfaces:
  • UART (3.3V TTL logic).
  • Speaker and microphone pins for voice applications.
• Dimensions: Approximately 22mm x 19mm.
• Operating Temperature: -40°C to +85°C.

Applications

1. IoT Projects: Used for remote monitoring, data logging, and control systems.
2. Home Automation: Enables communication between smart devices and users.
3. GPS Tracking: Paired with GPS modules for vehicle tracking systems.
4. Security Systems: Sends alerts or receives commands in intruder detection systems.
5. Telemetry: Collects and transmits environmental or machine data.
6. Wearables: Adds GSM communication capabilities to wearable devices.

How It Works

1. Powering the Module: The module requires a stable 3.3V–4.2V power supply. A power supply capable of delivering at least 2A is recommended for proper operation.
2. Inserting the SIM: Place a standard-sized SIM card into the onboard SIM card holder.
3. Connecting to a Microcontroller: Use the TX and RX pins to interface with a microcontroller (e.g., Arduino or Raspberry Pi) through UART.
4. Configuring via AT Commands: Configure and control the module using AT commands sent over the UART interface.
5. Functionality:
   • For SMS: Use commands like AT+CMGS to send text messages.
   • For calls: Commands like ATD can be used to initiate a voice call.
   • For data: Use GPRS commands to establish a network connection and transmit data.

Product Details:

The Crowtail 4G SIM A7670E Module GPS Breakout Board is an LTE Cat-1 module from SIMCom, designed for IoT and embedded applications requiring reliable 4G connectivity. It's particularly suitable for projects involving remote monitoring, industrial automation, and smart devices.

Product Details:

The SIM800L is a popular GSM/GPRS module used in IoT (Internet of Things) and mobile communication projects. It allows you to add SMS, voice call, and data functionalities to your embedded systems. The 5V TTL board version of the SIM800L is designed to be compatible with 5V systems and communicates with microcontrollers through TTL (Transistor-Transistor Logic) levels (which is compatible with standard 5V logic systems).

Product Details:

The R800C is a Quad-Band GSM/GPRS module developed by SIMCom. It operates on frequencies: 850/900/1800/1900 MHz, ensuring global compatibility. With a compact LCC (Land Grid Array) form factor, it measures 17.6 × 15.7 × 2.3 mm and weighs approximately 1.3g, making it suitable for space-constrained applications