Antenna & It's Equipments

Product Details:

GPS external active antenna series is designed to work in perfect harmony with MTK GPS module. Featuring water proof design for use in tough terrain and environment, it maximizes the potential of GPS module by bringing exceptional GPS signal reception performances. This module comes in SMA connector format with 2 meter length. In addition, they come with embedded magnet at the bottom for easy mounting on top of automobiles.

Additional Information:

• Item Code: antenna-gps-wire-3v-5v

Product Details:

This compact 2.4 GHz omni-directional "rubber-duck" antenna provides broad coverage and 6 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs, Bluetooth and other WLAN applications. Measuring 7.6 inches long, This flexible antenna features a tilt-and-swivel Reverse-Polarity SMA Plug connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with reverse-polarity SMA connectors including D-Link, Linksys WET11 and others.

Additional Information:

• Item Code: Antenna-GSM-Foldable-6DBI-Female

Product Details:

The GSM 4G Antenna with 3m Cable is an external antenna designed to improve the connectivity and performance of GSM, 3G, and 4G LTE devices. With a 3-meter cable, it offers flexibility in positioning the antenna for optimal signal reception. The antenna typically features an SMA male connector, ensuring compatibility with a wide range of devices.

Product Details:

This is a PCB Antenna with 2 dbi gain. Its applicable in 2G and 3G networks. Sometimes, its also useful as wifi antenna. It has a cable length of 15 cm and is of 1.13 mm. This GSM antenna has a UFL / IPX Female connector on one end, and other end has solder to the board.

This antenna is useful where the antenna needs to be kept inside the enclosure of the device. Mostly, in such cases, instead of any other external antenna, this pcb antenna is useful.

Product Details:

Description: This is the antenna for GSM Modems. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Has a length of 2 inches.

 

Specifications of our offered GSM Antenna are:

• 90 Degree Connector
• GSM/850E : 824 to 894MHz
• GSM : 880 to 960MHz
• DCS : 1710 to 1880MHz
• PCS : 1850 to 1990MHz

Additional Information:

• Item Code: Antenna-GSM-Finger-Straight-Angle

Product Details:

This is a rubber duck GSM Antenna with standard SMA Male Connecter and 3 meter wire length. It provides high gain of 2 dBi and suitable for tough terrain and open air environment applications. In comes with magnetic base.

Mechanical specifications:

• Connector SMA male
• Magnetic Base.

Additional Information:

• Item Code: Antenna-GSM-10cm-wire

Product Details:

This is the antenna designed for use with 4G LTE Modules and devices that require the highest possible efficiency and Peak gain to deliver best in Class Throughput on all major Cellular (2g/3g/4g) bands Worldwide.

APPLICATIONS:

Antenna can receive signal and transmit signal. Being a very important role in our life. Choose a right antenna is important.

Additional Information:

• Delivery Time: 15-20 days

Product Details:

This compact 2.4 GHz omni-directional "rubber-duck" antenna provides broad coverage and 6 dBi gain. It is a coaxial sleeve design with an omni-directional pattern. It is ideally suited for IEEE 802.11b and 802.11g wireless LANs, Bluetooth and other WLAN applications. Measuring 7.6 inches long, This flexible antenna features a tilt-and-swivel Reverse-Polarity SMA Plug connector, allowing them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many access points and radios that are equipped with reverse-polarity SMA connectors including D-Link, Linksys WET11 and others.

Additional Information:

• Production Capacity: Antenna-GSM-Foldable-6DBI-Male

Product Details:

Details:

• Our product is highly appreciated by our customers all over the india for the quality we offers.

Product Details:

The GSM Foldable 6dBi Antenna with SMA Male Connector is a high-performance antenna designed to enhance the signal reception and transmission capabilities of GSM devices. With a 6dBi gain, it offers improved coverage and reliability, making it ideal for applications such as GSM modems, routers, IoT devices, and communication modules.

Product Details:

The GSM 4G Foldable Antenna is a portable, high-gain antenna designed to improve the signal strength and quality of GSM and 4G LTE devices. Its foldable design allows for easy storage and portability, making it ideal for mobile applications, IoT devices, and remote installations. The white color ensures a discreet appearance, blending seamlessly with various environments.

Product Details:

Description: This is the antenna for GSM Modems. A small, high-quality, quad-band, standard SMA terminated, cellular antenna. Has a length of 2 inches.

 

Specifications of our offered GSM Antenna are:

• 90 Degree Connector
• GSM/850E : 824 to 894MHz
• GSM : 880 to 960MHz
• DCS : 1710 to 1880MHz
• PCS : 1850 to 1990MHz

Additional Information:

• Item Code: GSM-2DBI-Rubber-Duck

Product Details:

We are engaged in offering Antenna - 2.4ghz Foldable Male Small to our clients. Our range of products is appreciated by our clients

Additional Information:

• Item Code: Antenna-Foldable-MALE-SMALL

Product Details:

GPS external active antenna series is designed to work in perfect harmony with MTK GPS module. Featuring water proof design for use in tough terrain and environment, it maximizes the potential of GPS module by bringing exceptional GPS signal reception performances.This module comes in SMA connector format with 2 meter length. In addition, they come with embedded magnet at the bottom for easy mounting on top of automobiles.

Features:

• Embedded Magnet for easy mounting
• Water- Proof Design
• 2.5 M Cable with SMA Connector

 

Product Details:

A flexible GSM antenna is a type of antenna specifically designed for use in GSM (Global System for Mobile Communications) devices. These antennas are typically used in mobile phones, GSM modules, and IoT (Internet of Things) devices that require wireless communication over cellular networks. The flexibility of the antenna provides added durability and ease of integration into various devices where space and shape constraints are important.

Key Features of Flexible GSM Antennas:

1. Flexibility: The primary advantage of a flexible GSM antenna is its ability to bend and adapt to the shape of the device or enclosure it is integrated into. This makes it ideal for compact or portable devices where a rigid antenna would not fit.

2. Broad Frequency Range: Flexible GSM antennas are designed to operate over the frequency bands used by GSM networks, typically 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz. These frequencies are standard for most cellular communication systems worldwide, ensuring compatibility with GSM, GPRS, and EDGE services.

3. Durability: Despite being flexible, these antennas are made from materials that are resistant to wear and tear. The design allows them to withstand bending and manipulation without losing signal strength, making them suitable for wearable devices or other mobile solutions exposed to physical movement.

4. Compact Design: The flexible antenna is often more compact compared to traditional rigid antennas, which is important in miniaturized or space-constrained devices. This allows manufacturers to integrate the antenna into smaller enclosures without compromising on performance.

5. Good Reception: A flexible GSM antenna is designed to provide good reception and transmission performance in cellular networks. It typically offers decent signal strength and coverage, ensuring reliable communication even in environments with moderate signal strength.

6. Ease of Integration: These antennas are usually provided with an SMA (SubMiniature version A) or RP-SMA connector, which is compatible with many GSM modules. This makes it easy to integrate them with devices like Arduino-based GSM projects, Raspberry Pi modules, or any GSM-equipped system.

Applications:

• Mobile Phones: The most common use of flexible GSM antennas is in mobile phones, where they provide reliable wireless communication in compact devices.
• GSM Modules: Flexible antennas are often used in GSM modules for IoT applications, remote control systems, and industrial automation, enabling GSM connectivity for sending and receiving data.
• Wearable Devices: Because of their small size and flexibility, these antennas are commonly used in wearable devices such as smartwatches, fitness trackers, and health monitors that require GSM communication for calls or data exchange.
• Automotive Applications: Flexible GSM antennas can be integrated into vehicles for applications like vehicle tracking systems or emergency communication devices.
• Home Automation: Flexible GSM antennas are also used in home automation and security systems, allowing devices like smart door locks or alarm systems to communicate over cellular networks.

Advantages:

• Space Efficiency: The flexibility allows these antennas to be placed in tight or unconventional spaces within a device, making them ideal for designs that require efficient use of available space.
• Cost-Effective: Flexible GSM antennas are generally inexpensive, especially when compared to more complex and rigid antenna systems.

Product Details:

This is high gain Omni-directional with flexible springy magnetic stand base antenna. This antenna has SMA Male Connector with 3mtr.RG174 cable. This is Wall Mount Antenna which is easily clinging to iron surface like outdoor/indoor windows, cars, boat houses, and many more. The antenna is widely compatible with all cellular operators 2G/3G/4G LTE/CDMA/WADMA/GSM FCT devices and wireless communication devices as WI-FI Adapter, Wireless Router wireless CCTV camera, AP WLAN STB Modem Amplifier and more. Also applicable with all signal amplifier deceives which has SMA Female Connector

APPLICATION:
4 G wireless Router or Modem.

Additional Information:

• Delivery Time: 8 - 10 days

Product Details:

A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.

 

Key Specifications:

• Quad-band: 850/900/1800/1900MHz and 2.4GHz
• For GSM/GPRS, CDMA/1X, TDMA/AMPs, CDPD, 2 Way pager Re-Flex

Additional Information:

• Item Code: GSM-Antenna-Sticker

Product Details:

GL-Maxgain Sticker GSM Antenna 5Dbi comes with 3M Sticker on back, which makes it easier to attach to any surface. The wire of the antenna is of 3 meter length, which makes it suitable for outdoor or external use. It has high quality SMA Male Connector on end.

The antenna body is plastic molded, therefore, removing any change of conducting non signals to your circuit. These antennas are often used in applications where space is limited, and they are popularly used with mobile devices, IoT (Internet of Things) devices, and other electronic gadgets that require wireless GSM connectivity.

Product Details:

The A7600C-C1SE is Multi-Band LTE-TDD/LTE-FDD/GSM /GPRS/EDGE module solution in a SMT type which supports LTE CAT1 up to 10Mbps data transfer. It has strong extension capability with rich interfaces including UART,I2C,USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of A7600C-C1SE is LCC+LGA. The LCC part is compatible with the package of SIM7600 series. This also maximizes the investments of customers, and enables a short time-to-market. It is designed for applications that need high throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for many applications.

Additional Information:

• Item Code: A7600C1

Product Details:

The GSM Wire Antenna 3dBi with 5-meter cable is a type of antenna designed for GSM (Global System for Mobile Communications) applications. It is commonly used in projects or devices that require GSM communication, such as mobile phone systems, IoT devices, and wireless communication setups.

Key Features:

• 3dBi Gain: The 3dBi gain indicates the antenna's efficiency in receiving or transmitting signals. It is a moderate gain suitable for general GSM communication, offering good coverage in urban and rural areas.
• 5-Meter Cable: The antenna comes with a 5-meter (approximately 16.4 feet) long cable, allowing flexibility in positioning the antenna for optimal signal reception. This length is typically long enough to position the antenna in an area with better signal strength.
• GSM Compatibility: This antenna is designed specifically for GSM frequencies, typically in the 900 MHz and 1800 MHz bands, which are standard for GSM mobile networks.
• Connector Type: It generally has a SMA (SubMiniature version A) or RP-SMA connector, commonly used for wireless and communication modules, making it easy to connect to GSM modules like SIM900 or SIM800.
• Omnidirectional: The antenna typically has an omnidirectional pattern, meaning it radiates or receives signals equally in all directions around the antenna, providing consistent signal strength in a 360-degree pattern.
• Weatherproof: The wire and antenna are usually weatherproof or made of materials resistant to environmental elements, making it suitable for both indoor and outdoor use.
• Flexible Mounting: It can be easily mounted or positioned on devices or walls using suitable mounts or brackets (not always included).

Applications:

• GSM Modules: Used with GSM modules like SIM800, SIM900, or similar, which require antenna connections for mobile communication (text messaging, calling, data transfer).
• IoT Devices: Ideal for IoT (Internet of Things) applications that rely on GSM for data transmission, such as remote monitoring, vehicle tracking, and home automation systems.
• Embedded Systems: Commonly used in embedded systems and prototypes that require wireless mobile communication.
• M2M Communication: Suitable for Machine-to-Machine (M2M) communication, which involves devices exchanging data via GSM networks.
• Mobile Communication Systems: Used in mobile data transmission systems, including remote data logging, alarms, and control systems.
• Telematics: In telematics systems for automotive, fleet management, and other GPS-enabled applications.

Benefits:

• Improved Signal Reception: The antenna provides better reception and transmission compared to built-in antennas in GSM modules, especially in areas with weak signals.
• Long Cable Length: The 5-meter cable allows flexibility in positioning the antenna at a distance from the device, which can help improve signal strength and minimize interference.
• Easy Integration: With standard connectors (like SMA or RP-SMA), the antenna can be easily integrated into various GSM projects, ensuring compatibility with most GSM modules.
• Compact and Efficient: Despite the moderate 3dBi gain, the antenna is compact and efficient for general GSM communication, balancing size and performance.
• Versatile Use: Suitable for both indoor and outdoor environments, making it adaptable for a variety of setups.

Product Details:

2.4GHz Duck Antenna Male 6dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with RF ICs. 50 ohm impedance.

Features:

• Product Type: Dual frequency wifi antenna

Product Details:

A Spring antenna or helical antenna is an antenna consisting of one or more conducting wires wound in the form of a helix. A helical antenna made of one helical wire, it has been widely used in telecommunication to communicate. This antenna has a frequency range of 865MHz to 868MHz with a gain of 1.5dBi depending upon the PCB ground plane. One of the main reasons to use a helix antenna is its low cost and compact size.  

Product Details:

Details:

• Our product is highly appreciated by our customers all over the india for the quality we offers.