Product Details:
Voltage | DC 5V |
Length | 274mm / 10.8in |
Step Angle | 5.625 * 1/64 |
Reduction ratio | 1/64 |
Weight | 45gm |
Diameter | 28mm / 1.1in |
PCB Board Size | 29 x 21 mm |
Noise | <40dB (120Hz, No load, 10cm) |
DC Resistance | 200+-7% (25) |
No-load Pull in Frequency | >600 Hz |
No-load Pull out Frequency | >1000 Hz |
Built-in mounting plate with mounting holes
Product Name : Stepper Motor Driver Board + Stepper Motor
Insulation Resistance : >10M (500V)
Dielectric Strength : 600V AC / 1mA / 1s
Insulation Grade : A
Pull in Torque : >34.3mN.m(120Hz)
Detent Torque : >34.3mN.m
Temperature Rise : <40K(120Hz)
Product Details:
Size | 21 x 14.7 cm approx |
Voltage | 3-6 V |
Gear Motor Reduction Radio | 148 |
Wheel Size | 6.6 x 2.6 cm approx. |
Tire Center Hole | 5.3mm Long, 3.5mm wide |
No Load Speed (6V) | 200RPM +-10% |
No Load Current (6V) | Less Than 200mA |
No Load Speed (3V) | 90RPM +-10% |
No Load Current (3V) | Less Than 150mA |
Features:
Product Details:
Minimum Order Quantity | 1 Piece |
Output Voltage | 6.5 V to 12 VDC |
Input Voltage | 3.3 V and 5 VDC |
Onboard power | 3.3 V and 5 V row needle leads |
Onboard power switch | Convenient power control |
Compatible with | MB102 breadboards |
Onboard power supply chip | AMS1117-3.3 and AMS1117-5 |
Onboard USB female | can be used as a power input and USB power output |
Specifications:
Additional Information:
Product Details:
Usage | educational robot |
Car Speed(M/minute) | 48 |
Current | 120MA |
RPM (With tire) | 240 |
No load current (3V) | 150mA |
No load current (6V) | 200mA |
No load speed (3V) | 90RPM % |
No load speed (6V) | 200 RPM % |
Reduction ratio | 148 |
Voltage | 3-6 V |
Product Details:
Color | White |
Total tie points | 400 |
Length | 83mm |
Width | 55mm |
Height | 9mm |
Weight | 30gms |
Package Weight | 35gms |
This is a half-size solderless breadboard with 400 tie points. It has a standard double-strip in the middle and two power rails on both sides. You can just 'snap' these solderless breadboards together either way to make a longer and/or wider breadboard.
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Security systems, Menu selection, Data entry for embedded systems |
Maximum Rating | 24 VDC, 30 mA |
Insulation Resistance | 100M Omh, 100V |
Interface | 8-pin access to 4x4 matrix |
Operating temperature | 32 to 122 Degree F (0 to 50 Degree C) |
Dimensions | Keypad, 2.7 x 3.0 in (6.9 x 7.6 cm) Cable 0.78 x 3.5 in (2.0 x 8.8 cm) |
Flexible Circuit Length | Approx. 3.3 inch / 83 mm |
Pad Size | Approx. 3 x 2.7 inch / 76 x 69 mm |
Additional Information:
Product Details:
Material | ABS |
Total pins | 2 x 17 rows of interconnected pins (5 per row) 170 pins in total |
Size | 45 x 35 x 9 mm |
Backing | Self-adhesive Backing |
Current capacity per pin | 1 ampere at 5 volts and 0.333 amperes at 15 volts (5 watts) |
Lead pitch | 0.1inch (2.54 mm) |
Color | White |
A modern solderless breadboard consists of a perforated block of plastic with numerous tin plated phosphor bronze or nickel silver alloy spring clips under the perforations. The clips are often called tie points or contact points. The number of tie points is often given in the specification of the breadboard.
The spacing between the clips (lead pitch) is typically 0.1'' (2.54 mm). Integrated circuits (ICs) in dual in-line packages (DIPs) can be inserted to straddle the centerline of the block. Interconnecting wires and the leads of discrete components (such as capacitors, resistors, and inductors) can be inserted into the remaining free holes to complete the circuit. Where ICs are not used, discrete components and connecting wires may use any of the holes. Typically the spring clips are rated for 1 ampere at 5 volts and 0.333 amperes at 15 volts (5 watts).
These mini breadboards make it easy to try out things hooked up to a arduino mainboard by using wire jumpers. The boards have a self-adhesive backing and 2 x 17 rows of interconnected pins (5 per row) 170 pins in total. The dimension of this mini breadboards is 45 x 35 x 9 mm
Product Details:
Material | Plastic |
Length | 20 cm |
Packaging Type | Packets |
Number of Pin | 40 Pin |
Weight | 30 gm |
Cable Type | Male to Male,Male to Female,Female To Female |
Product Details:
Brand | ADIY |
Part Number | L293 |
Supply-Voltage Range | 4.5 V to 36 V |
Drive operating current IO: | 600 mA for each motor |
Control | The driver can driver two DC motors (Motor A & B) or one stepper motor. |
Connections | Terminal Blocks for connecting motors & power supply |
Peak Output Current | 2 A Per Channel |
This Motor Driver Board is designed to Work with L293D IC. The L293D is a popular motor driver IC designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V. With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller. This can control 2 DC Motors, their direction using control lines and their speed using PWM.
Features:
Product Details:
Minimum Order Quantity | 1 Piece |
Model | MB-102 |
Dimension | 16.7 x 5.7 x 1 cm |
Tie Points | 830 tie points (consists of 630 tie-point terminal strip,200 tie-point distribution strips) |
Matrix | 126 separate 5 point terminals,plus 4 horizontal bus lines (Power Lines) of 50 test points each |
Wire size | Suitable for 20~29 AWG (0.3mm ~ 0.8mm) wires |
Two Allocation | 200 jacks |
Plastic Parts | ABS |
Use | Experiment,Test |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Size | Pad Size 69.2 x 76.9 x 0.8mm |
Connector | Dupont 7 pins, 0.1" (2.54mm) Pitch |
Operation Temperature | -20 to 40 deg C |
Cable Length | 3-1/3" or 86mm (include connector) |
Pad Size | 69.2 x 76.9 x 0.8 mm |
Mount Style | Self-Adherence |
Max. Circuit Rating | 35VDC, 100mA |
Insulation Spec | 100M Ohm, 100V |
Dielectric Withstand | 250VRms (60Hz, 1min) |
Contact Bounce | < 5 ms |
Life Expectancy | 1 million closures |
Product Details:
Operating temperature | 0 to 50 Deg C |
Size | 50 x 28 x14mm |
Power Supply | 5 V power supplied by a USB connector |
USB Cable | standard A to Mini- B cable |
JTAG | Supported |
Support | STM32 SWD interface debugging & STM8 all series download |
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
Much similar in architecture for debugging, the ST-LINK/V2 and the ST-LINK/V2-ISOL share the same features like digital isolation between the PC and the target application board this allows to withstands voltages of up to 1000 Vrms.
Specifically the debugger incorporates the use of USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software for STM8 application, and use of the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments for STM32 applications.
Product Details:
Rated Supply Voltage | 3V ~ 12V |
RF ASK Receiver Receiver Frequency | 433.92 MHz |
Supply Current | 3.5 mA |
Standard Operating Voltage | 5 V |
Output Power | 4 ~ 12 dBm |
Typical Sensitivity | 105 dBm |
This is an ASK Hybrid transmitter receiver module at 434 Mhz. The transmitter Module employs a crystal-stabilized oscillator, ensuring accurate frequency control for best range performance. There is no requirement of external RF components except Antenna.
Additional Information: