Servo Motors

Product Details:

Specification:

• Control System: Pulse Width Control 1520usec Neutral
• Operating Speed (4.8V): 0.23sec/60 degrees at no load
• Operating Speed (6.0V): 0.19sec/60 degrees at no load
• Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
• Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
• Operating Angle: 45 Deg. one side pulse traveling 400usec
• Continuous Rotation Modifiable: Yes
• Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
• Current Drain (4.8V): 7.2mA/idle
• Current Drain (6.0V): 8mA/idle
• Bearing Type: Plastic Bearing
• Gear Type: All Nylon Gears

Additional Information:

• Item Code: S3003
• Delivery Time: 8 - 10 days

Product Details:

The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. This high-speed standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast!

Additional Information:

• Item Code: mg995
• Delivery Time: 8 - 10 days

Product Details:

The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. This high-speed standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware, or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG995 Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast!

Additional Information:

• Item Code: MG995-servo-motor-180-degree

Product Details:

Tiny and lightweight with high output power, this tiny servo i Helicopter, Quadcopter or Robot. durability. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially si (arms) and hardware

Additional Information:

• Item Code: MG90-servo-motor

Product Details:

_{The DYS 1800KV Brushless Motor is a high-performance, efficient motor designed for multirotor and RC aircraft enthusiasts seeking smooth power delivery and reliability. With a KV rating of 1800, this motor offers an excellent balance between thrust and efficiency, making it ideal for lightweight drones and racing quads.}

Product Details:

Specifications:

• Great for truck, Boat, Racing Car, Helicopter and Airplane.
• Stable and Shock Proof.
• Metal Gear 
• Double Ball Bearing 

Product Details:

This High-Torque MG996R Digital Servo features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock-proofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwidth and centering. The unit comes complete with 30cm wire and 3 pin 'S' type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. This high-torque standard servo can rotate approximately 120 degrees (60 in each direction). You can use any servo code, hardware or library to control these servos, so it's great for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. The MG996R Metal Gear Servo also comes with a selection of arms and hardware to get you set up nice and fast! 

Additional Information:

• Item Code: Servo-Motor-MG996-360-DEGREE

Product Details:

The DM542 is a digital stepper motor driver commonly used for controlling stepper motors in applications such as CNC machines, 3D printers, robotics, and automation. It's designed to drive bipolar stepper motors, and it offers a high degree of precision and control, making it ideal for use in various motion control systems.

Product Details:

The SG90 mini servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance and high torque of 1.5kg cm gives you the freedom to use it for a variety of projects. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.

Additional Information:

• Item Code: SG90-9G
• Delivery Time: 8 - 10 days

Product Details:

CCPM Servo Consistency Master / Servo testerThe device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.There are 3 modes to check servos or ESC:Manual mode: turn the knob with different speed, check the reaction time.Neutral mode: make the servo go back to the neutral point.Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.You can also connect 1-3 ESC to test and compare their reaction time respectively.It can connect 3 servos of the CCPM helicopters and select servos.It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.