LCD Display

Product Details:

This is a popular 16x1 LCD with Blue Backlight display. It is based on the S6A0069 or Equivalent display controller which makes it is easy to interface this lcd most microcontrollers.

Features: RG 1601 Display 16x1 (Blue) 

• Display Format : 16×1 Charactors
• Display Mode : (STN,Positive,Y/G) OR(STN,NEGATIVE,BLUE) OR FSTN positive
• Polarizer Mode : Transmissive
• Driving Method : 1/16Duty, 1/5Bias
• Viewing Direction : 6 O’clock
• Backlight : Y/G or white
• Controller : S6A0069 or Equivalent.
• Interface : 8-Bit Parallel Interface

Additional Information:

• Item Code: RG1601-Blue-16x1

Product Details:

The RG2004C Display 20x4 Blue Jumbo is a type of LCD (Liquid Crystal Display) that features 20 characters per line and 4 lines (20x4) of text, making it suitable for displaying more information than the standard 16x2 displays. It is commonly used in various embedded systems, DIY projects, and Arduino or Raspberry Pi applications where displaying multiple lines of text or data is required.

Key Features:

1. Display Type:

   • 20x4 Character LCD: It can display 20 characters per line and 4 lines of text, making it useful for displaying more detailed information at once compared to smaller displays.
   • Blue Backlight: The display features a blue backlight with white text or sometimes blue on blue, providing good contrast for readability in various lighting conditions.

2. Jumbo Size:

   • The term "Jumbo" likely refers to the larger size of the characters on the display compared to standard LCDs. This can make it easier to read the text from a distance or in applications where visibility is important.

3. Interface:

   • The RG2004C typically uses the HD44780 controller, a standard controller for many 16x2 and 20x4 character LCDs. This makes it compatible with a wide range of microcontrollers, such as Arduino, Raspberry Pi, or ESP32, and it's often controlled through either an 8-bit or 4-bit parallel interface.
   • I2C Interface (Optional): Some versions of this display come with an I2C module, allowing for communication using just two wires (SDA and SCL) instead of multiple GPIO pins, making it easier to connect to a microcontroller.

4. Character Size:

   • The jumbo size of the characters may be larger than typical 5x8 matrix character displays, which is useful for applications where the display needs to be seen from a greater distance.

5. Backlight:

   • Blue backlight is commonly used for better visibility, especially in darker environments. Some variants may allow adjusting the brightness or even turning it off to save power.

6. Power Supply:

   • Typically powered by 5V DC, making it suitable for integration into a wide range of projects. Some versions can also be used with a 3.3V supply if the voltage is regulated correctly.

7. Applications:

   • Microcontroller Projects: Widely used in Arduino, Raspberry Pi, ESP32 projects for displaying text or sensor data.
   • Real-Time Data Display: It can be used for showing real-time data such as temperatures, sensor readings, or system status.
   • User Interfaces: The 20x4 format makes it useful for creating simple user interfaces for embedded systems, automation, and DIY electronics projects.
   • Industrial or Commercial Displays: Due to its size, it is sometimes used in industrial control systems or machines where visibility is critical.

Technical Specifications:

• Display Type: 20x4 Character LCD
• Character Size: Jumbo (larger than standard 5x8 pixel characters)
• Backlight Color: Blue (with white or blue text)
• Interface Type: Parallel (HD44780 compatible) or I2C (optional)
• Supply Voltage: 5V DC (common), 3.3V (possible with voltage regulator)
• Control Chip: HD44780 (standard LCD controller)
• Pins Required:
  • Parallel: 16 pins (for data and control signals)
  • I2C: 4 pins (VCC, GND, SDA, SCL)
• Operating Temperature Range: -20°C to 70°C (depending on the model)

Product Details:

Features:

• Display Format  16×1 Charactors
• Display Mode  (STN,Positive,Y/G) OR(STN,NEGATIVE,BLUE) OR FSTN positive
• Polarizer Mode  Transmissive
• Driving Method  1/16Duty, 1/5Bias
• Viewing Direction  6 Oclock
• Backlight  Y/G or white
• Controller  S6A0069 or Equivalent.
• Interface  8-Bit Parallel Interface

Product Details:

The RG2002 is a 20x2 character LCD display typically used for text-based output. It features 20 characters per line and 2 lines, with green monochrome backlighting, making it ideal for displaying short, simple text or numerical information. This type of display is commonly used in embedded systems, microcontroller-based projects, and basic user interfaces.

Product Details:

Features: The features of LCD are as follows:

• Display mode : STN /BLUE, NEGATIVE, TRANSMISSIVE
• Colour : Display dot :WHITE Background: BLUE
• Display Format : 8 (characters) ×2 (line)
• * IC : ST7066
• Interface Input Data : 8 Bits
• Driving Method : 1/16 Duty, 1/5 Bias
• Viewing Direction: 6 O’clock
• Backlight : LED (WHITE)

Additional Information:

• Item Code: RG0802-DISPLAY-8x2-BLUE

Product Details:

Here are the details for the HTTM-SCB Capacitive Touch (2.7V-6V):Display Size: The display size for the HTTM-SCB typically ranges from 1.44 inches to 2.8 inches, depending on the specific variant.Display Type: The display is usually an LCD or OLED screen, known for high contrast and sharpness, and is often designed for embedded system applications.Usage/Application: This capacitive touch display is commonly used in embedded systems, Arduino projects, handheld devices, and applications requiring a user interface (UI) like home automation, point-of-sale systems, and medical equipment.Dimensions: The physical dimensions of the HTTM-SCB display vary depending on the screen size but generally are compact and designed for small form factor applications. A typical dimension might be around 2.8 inches diagonal with a corresponding physical footprint of approximately 70mm x 50mm.Brand: HTTM (a brand specializing in capacitive touch screens and embedded display solutions).Operating Temperature: The HTTM-SCB capacitive touch screen typically operates within a temperature range of -20°C to 70°C, making it suitable for a wide variety of environments, including outdoor applications.Current: The current consumption typically ranges from 10mA to 50mA, depending on the display’s brightness settings and other active components.Model Name/Number: HTTM-SCB.Resolution: The resolution of the HTTM-SCB display depends on the screen size but usually features a resolution of 240x320 pixels for smaller screens, offering clear and detailed images or text.Screen Type: The display typically uses capacitive touch technology, allowing users to interact with the screen using finger gestures. It may be covered with a tempered glass or plastic layer for durability and smooth touch experience.Key Features:Capacitive Touch: Offers sensitive and responsive touch capabilities, requiring only a light touch, making it ideal for modern user interfaces.Wide Voltage Range: Operates within a voltage range of 2.7V to 6V, making it adaptable for various low-voltage embedded systems.Compact and Lightweight: Suitable for applications where space and power efficiency are important.High Resolution and Clarity: The 240x320 resolution ensures that the content displayed is sharp and clear, even for detailed images or text.Applications:Embedded Systems: Perfect for use with microcontrollers like Arduino, ESP32, or Raspberry Pi to build interactive UIs.Portable Devices: Used in handheld devices that require compact, efficient, and touch-enabled interfaces.Consumer Electronics: Ideal for devices like smart home controllers, portable displays, and point-of-sale systems.The HTTM-SCB Capacitive Touch display is a versatile and compact solution for adding touch interactivity to embedded systems, offering a high-quality user experience with efficient power usage.

Product Details:

RG 1602 ,16x2 LCD Display in a captivating blue hue, perfect for your electronics projects. This versatile and reliable LCD screen features a 16x2 character layout, allowing for clear and crisp text display. Its compact design and easy-to-use interface make it ideal for a wide range of applications. Whether you're a hobbyist or a professional, this high-quality LCD display with a soothing blue backlight will enhance your projects and captivate your audience. Explore the possibilities today

This 16x2 Blue Jumbo Display, featuring the same captivating blue color but with a larger font size for enhanced visibility. This display offers 2 lines, each with 16 characters, capable of displaying both alphanumeric characters and numbers. Its versatile functionality makes it perfect for applications such as data scanners and meters, providing clear and easy-to-read indications of critical information.

Additional Information:

• Item Code: RG1602-Blue-Jumbo

Product Details:

The  8x2 Green color LCD display module is the perfect solution for hobbyists and electronic enthusiasts. This versatile LCD module, capable of displaying 8 characters per line across 2 lines, is ideal for various electronic projects.

The green color enhances visibility, making it suitable for different lighting conditions. The power source is DC, and the lightweight design adds to its convenience. Suitable for all ages, this LCD module measures 8x2 characters.

Additional Information:

• Item Code: RG0802-DISPLAY-GREEN

Product Details:

The features of LCD are as follows:- Colour: Display dot: BLACK Background: RGB- Display Format: 16 (characters) ×2 (line)- IC: Aip31068 Aip31065- Interface Input Data: 8 Bits- Driving Method: 1/16 Duty, 1/5 Bias- Viewing Direction : 6 O’clock

Additional Information:

• Item Code: RG1602-RGB-display

Product Details:

The RG4002A is a 40x2 character LCD display featuring a green backlight, designed to display 40 characters per line across 2 lines of text. It is ideal for applications where more text space is required compared to smaller character-based displays. This display is commonly used in embedded systems, industrial equipment, home automation, and other projects where clear, readable text output is essential.

Description:

• Display Type: Character LCD with a 40x2 resolution (40 characters per line and 2 lines of text).
• Color: Green backlight, with black or white characters displayed against a green background, offering high contrast and good readability.
• Controller: Typically uses the HD44780 or compatible controller, which is standard for many character-based LCD displays. This controller enables easy text management and supports cursor control, clearing the screen, and more.
• Interface: Supports parallel communication (8-bit or 4-bit) or serial communication options like I2C or SPI, allowing for versatile integration with microcontrollers and systems.

Additional Information:

• Item Code: RG4002A-Display-40x2-Green

Product Details:

The features of LCD are as follows:

·       Display mode        : STN /Black, POSITIVE, TRANSMISSIVE

·       Colour                   :Display dot :White

 Background: Black

·       Display Format     : 40 (characters) ×4 (line)

·       * IC           : 7066 OR EQV 7063 OR EQV

·       Interface Input Data          :  8 Bits

·       Driving Method    : 1/16 Duty, 1/5 Bias

·       Viewing Direction : 6 O’clock

Backlight        : LED (White)

Additional Information:

• Item Code: RG4004-Display-40x4-Black

Product Details:

The RG1602A-IIC(P) is a 16x2 character LCD module featuring a green backlight and an integrated PCF8574T I2C interface. This module simplifies the connection between microcontrollers and LCDs by reducing the number of required GPIO pins, making it ideal for projects with limited I/O availability

Product Details:

The RG4004 (also known as RC4004) is a 40x4 character LCD display module, commonly used in embedded systems, industrial equipment, and DIY electronics projects. It features a blue STN (Super Twisted Nematic) panel with white backlighting, offering high contrast and readability.

Product Details:

The features of LCD are as follows:

·       Display mode        : STN /BLUE, NEGATIVE, TRANSMISSIVE

·       Colour       : Display dot :WHITE

Background: BLUE

·       Display Format     : 20 (characters) ×2 (line)

·       * IC           : 7066 7065

·       Interface Input Data          :  8 Bits

·       Driving Method    : 1/16 Duty, 1/5 Bias

·       Viewing Direction : 6 O’clock

·       Backlight  : LED (WHITE)

Additional Information:

• Item Code: RG2002-Display-20x2-Blue

Product Details:

The features of LCD are as follows:- Display mode : STN /GREEN, NEGATIVE, TRANSMISSIVE- Colour : Display dot : BLACK Background: GREEN- Display Format : 192x64- * IC : SBN0064- Interface Input Data : 8 Bits- Driving Method : 1/64 Duty, 1/9 Bias- Viewing Direction : 6 O’clock- Backlight : LED (WHITE)

Additional Information:

• Item Code: RG19264-GREEN-display

Product Details:

The features of LCD are as follows:1. Display mode : STN /WHITE, NEGATIVE, TRANSMISSIVE2. Colour : Display dot : BLACK            Background: WHITE3. Display Format : 128 (characters) × 64 (line)4. * IC : ST7920 ST79215. Interface Input Data : 8 Bits6. Driving Method : 1/65 Duty, 1/9 Bias7. Viewing Direction: 6 O’clock8. Backlight : LED (WHITE)

Additional Information:

• Item Code: RG12864-Serial-Interface-white

Product Details:

This is a popular 16x2 LCD With Blue Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this lcd most microcontrollers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely find ready libraries to use this LCD.

It works of 5v and has a blue backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Product Details:

The RG2004C Display is a 20x4 character display that features green text on a black background (LCD). This is a commonly used display in embedded systems, DIY electronics, and various other applications where alphanumeric text needs to be displayed in a clear, easy-to-read format.

Key Features:

1. Character Display:

   • The 20x4 means the display can show 20 characters per line and has 4 lines. This allows it to display up to 80 characters in total at a time.
   • Each character is typically a 5x8 dot matrix, which provides clear and readable text.

2. Green Text on Black Background:

   • Green backlit LCD displays are known for their high contrast, providing easy readability in a variety of lighting conditions. The green text is sharp and stands out well against the dark background.

3. Interface:

   • Typically, the RG2004C display uses the HD44780 or compatible controller, which supports communication via parallel (4-bit or 8-bit) and I2C (for easier wiring and control) interface.
   • I2C Interface: If the display comes with an I2C adapter, it reduces the number of pins required to control the display, making it easier to connect to microcontrollers like Arduino or Raspberry Pi.

4. Voltage and Power:

   • Operating voltage is usually 5V, making it compatible with common microcontroller platforms. Power consumption is relatively low, making it suitable for battery-powered projects as well.

5. Viewing Angle and Size:

   • The display typically has a wide viewing angle and is readable from a variety of angles, especially under normal lighting conditions.
   • The physical size of the display is designed to be compact, making it easy to integrate into projects, dashboards, or embedded systems.

6. Backlight:

   • The green backlight is a key feature, ensuring that the display is visible even in low-light environments. It can sometimes be dimmed or turned off if power consumption needs to be minimized.

7. Applications:

   • Arduino and Raspberry Pi Projects: Commonly used in DIY projects to display data such as sensor readings, system status, or outputs from various sensors.
   • Information Display: Can be used in electronic meters, temperature and humidity displays, or home automation systems.
   • Embedded Systems: Perfect for embedded applications where user interfaces require text output for control, feedback, or data visualization.
   • Digital Clocks and Timers: Useful in projects requiring clear time display, alarms, or countdowns.

8. Durability:

   • The display is generally robust, capable of handling typical usage scenarios without significant wear and tear. The LCD panel is durable and resistant to shocks, making it a reliable component for a variety of environments.

9.  

Product Details:

RG1604 DISPLAY 16×4 BLUE

Features:

• Display mode: STN /BLUE, NEGATIVE, TRANSMISSIVE
• Colour : Display dot :WHITE

                        Background: BLUE

• Display Format: 16 (characters) ×4 (line)
• * IC: ST7066 ST7065
• Interface Input Data:           8 Bits
• Driving Method: 1/32 Duty, 1/6 Bias
• Viewing Direction: 6 O’clock
• Backlight: LED (WHITE)

Additional Information:

• Item Code: RG1604-Blue

Product Details:

This is a high quality 16 character by 2 line intelligent display module, with back lighting, Works with almost any microcontroller.
This is a popular 16x2 lcd display. It is based on the hd44870 display controller hence it is easy to interface with most micro controllers. It works of 5v and has a green back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin (pin 3).

Features:

• 16 Characters x 2 Lines
• 5x7 Dot Matrix Character Cursor
• HD44780 Equivalent LCD Controller/driver Built-In
• 4-bit or 8-bit MPU Interface
• Standard Type
• Works with almost any Microcontroller
• Great Value Pricing

Product Details:

Features:

• Display mode : STN /GREEN, NEGATIVE, TRANSMISSIVE
• Colour : Display dot :BLACK Background: GREEN
• Display Format : 16 (characters) ×4 (line)
• * IC : ST7066 ST7065
• Interface Input Data : 8 Bits
• Driving Method : 1/32 Duty, 1/6 Bias 
• Viewing Direction: 6 O’clock
• Backlight : LED (WHITE) 

Additional Information:

• Item Code: RG1604Green

Product Details:

16x2 Alphanumeric LCD can show 16 Columns and 2 Rows therefore a total of (16x2) 32 characters can be displayed. Each character can either be an alphabet or number or even a custom character. This particular LCD has a white backlight. It is based on the hd44870 display controller hence it is easy to interface with most micro controllers.

Additional Information:

• Item Code: rg1602-white-lcd

Product Details:

The RG2402 Display 24x02 Blue is an LCD module with a display configuration of 24 characters per line and 2 lines (24x2), featuring a blue backlight with white or blue text. This display is similar to other character LCDs like the 20x4 or 16x2 displays but provides more horizontal space with its 24 characters per line, making it ideal for projects where you need to display more data across fewer lines.

Key Features:

1. Display Type:

   • 24x2 Character LCD: It can display 24 characters per line and 2 lines of text. This configuration gives you more horizontal space compared to standard 16x2 displays, which is useful when displaying longer strings of text or more data in one line.
   • Blue Backlight: The display features a blue backlight, which enhances visibility, particularly in darker environments, and provides a clean contrast with the white or blue characters.

2. Interface:

   • The RG2402 typically uses the HD44780 controller, which is a common controller used in many character LCDs. This ensures wide compatibility with popular microcontrollers like Arduino, Raspberry Pi, ESP32, and more.
   • Parallel Interface: Like most standard character LCDs, it uses a parallel interface with 16 pins for communication. However, an optional I2C interface module can also be used to reduce the number of pins required for communication (using just 2 wires: SDA and SCL).

3. Character Size:

   • The character size in the 24x2 display is similar to the standard 5x8 matrix, but the display can accommodate more characters horizontally per line, which is helpful for displaying longer messages.

4. Backlight:

   • Blue Backlight: The blue backlight provides a high-contrast view, ensuring text is visible in low-light environments. Some versions of the display allow you to adjust the brightness of the backlight.

5. Power Supply:

   • The RG2402 operates at 5V DC, which is common for many LCD modules. This makes it compatible with standard 5V power sources typically used in microcontroller projects.

6. Applications:

   • Microcontroller Projects: Perfect for use with Arduino, Raspberry Pi, ESP32, and ESP8266 to display sensor data, system messages, or status information.
   • DIY Projects: Ideal for hobbyists and engineers working on DIY projects, home automation systems, and IoT devices.
   • Energy Monitoring Systems: The display can show real-time data from sensors, including power consumption or voltage readings.
   • Control Panels: Useful in embedded systems for providing real-time information or creating basic user interfaces.

Technical Specifications:

• Display Type: 24x2 Character LCD
• Character Size: 5x8 matrix
• Backlight Color: Blue
• Interface Type: Parallel (HD44780 compatible) or I2C (optional)
• Supply Voltage: 5V DC
• Controller Chip: HD44780 (standard LCD controller)
• Pins Required:
  • Parallel: 16 pins (for data and control signals)
  • I2C: 4 pins (VCC, GND, SDA, SCL)
• Operating Temperature Range: -20°C to 70°C (depending on model)

Product Details:

The DWIN DMG80480T050_A5WTR is a 5.0-inch industrial-grade HMI (Human-Machine Interface) display module designed for embedded systems and automation applications. It features a high-resolution IPS TFT-LCD panel with resistive touch capability, offering a durable and user-friendly interface for various devices.

Product Details:

The DWIN DMG80480T070_09WTC is a 7.0-inch industrial-grade HMI (Human-Machine Interface) display module designed for embedded systems, automation, and IoT applications. It features a high-resolution TN TFT-LCD panel with capacitive touch capability, offering a durable and user-friendly interface for various devices

Product Details:

The features of LCD are as follows:

 

·       Display mode: STN /BLACK, NEGATIVE, TRANSMISSIVE

·       Colour: Display dot: WHITE

                   Background: BLACK

·       Display Format: 16 (characters) ×2 (line)

·       * IC: ST7066        ST7065

·       Interface Input Data: 8 Bits

·       Driving Method: 1/16 Duty, 1/5 Bias

·       Viewing Direction           : 6 O’clock

·       Backlight: LED (WHITE)

Additional Information:

• Item Code: RG1602A_Display-16X2-Black

Product Details:

The features of LCD are as follows:

·       Display mode        : STN /Black, POSITIVE, TRANSMISSIVE

·       Colour                   :Display dot :White

 Background: Blue

·       Display Format     : 40 (characters) ×4 (line)

·       * IC           : 7066 OR EQV 7063 OR EQV

·       Interface Input Data          :  8 Bits

·       Driving Method    : 1/16 Duty, 1/5 Bias

·       Viewing Direction : 6 O’clock

·       Backlight  : LED (Blue)

Additional Information:

• Item Code: RG4004-Black-display

Product Details:

The features of LCD are as follows:- Display mode : STN /GREEN, POSITIVE, TRANSMISSIVE- Colour : Display dot : BLACK Background: GREEN- Display Format : 240x64 Dots- * IC : RA6963- Interface Input Data : 8 Bits- Driving Method : 1/64 Duty, 1/9 Bias- Viewing Direction: 6 O’clock- Backlight : LED (WHITE)

Additional Information:

• Item Code: RG24064-DISPLAY-GREEN

Product Details:

The RG240128 is a 240x128 pixel graphical LCD display, typically used for displaying higher-resolution graphical content compared to standard character-based LCDs. It offers a 240x128 pixel resolution in a green monochrome format, making it suitable for a wide range of applications, including embedded systems, consumer electronics, and industrial devices.This display can be used for more complex graphical interfaces, including images, icons, and detailed text, allowing for better visual output in various projects.

• Display Type: Graphical LCD with a resolution of 240x128 pixels (240 pixels horizontally and 128 pixels vertically).
• Color: Green monochrome display, where the background is green, and the characters or graphical images are typically black or dark green.
• Controller: The display commonly uses controllers like the ST7920, UC1701, or similar, which enable the management of pixels and text on the screen.
• Interface: It typically supports parallel communication (8-bit or 4-bit) and might also support serial interfaces like SPI or I2C for reduced pin usage in microcontroller-based applications.

Additional Information:

• Item Code: RG240128-green-display

Product Details:

Character displays are used to display characters and numbers. Available in green, blue and white background. These displays are used in instruments panels, measurement devices, meters etc.

Additional Information:

• Item Code: RG1602-Display-3.3V-Green

Product Details:

Character displays are used to display characters and numbers. Available in green, blue and white background. These displays are used in instruments panels, measurement devices, meters etc.

Additional Information:

• Item Code: RG1602-Display-3.3V-Blue

Product Details:

 

The features of LCD are as follows:

 

·       Display Format: 16 (characters) ×2 (line)

·       * IC: Aip31068    Aip31065

·       Drive Voltage: 5.0V

·       Driving Method: 1/16 Duty, 1/4 Bias, VO 4.7V

·       Operating Temperature: -20-70℃

Storage Temperature: -30-80℃

·       Viewing Direction           : 6 0’clock

·       Backlight: LED (WHITE) IF= 20MA

·       Background Colour: RGB

Additional Information:

• Item Code: RG1602-19_RGB_I2C_Inbuild

Product Details:

This is a popular 20x4 LCD With Blue Back Light display. It is based on the HD 44870 display controller which makes it is easy to interface with most micro controllers. Its extreme popularity ensures that no matter which micro controller platform you are using this LCD on, you will definitely find ready libraries to use this LCD

It works of 5v and has a blue back light which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltage at the contrast control pin.

Product Details:

The features of LCD are as follows:
Display mode : STN /BLUE, NEGATIVE, TRANSMISSIVE
Colour : Display dot : WHITE Background: BLUE
Display Format : 128 (characters) × 64 (line)
* IC : ST7920 ST7921
Interface Input Data : 8 Bits
Driving Method : 1/65 Duty, 1/9 Bias
Viewing Direction: 6 O’clock
Backlight : LED (WHITE)

Additional Information:

• Item Code: RG12864-Serial-Interface-BLUE

Product Details:

The features of LCD are as follows:

·       Display mode        : STN /GREEN, NEGATIVE, TRANSMISSIVE

·       Colour       : Display dot : BLACK

Background: WHITE

·       Display Format     : 20 (characters) × 4 (line)

·       * IC           :  7066 7065

·       Interface Input Data          :           8 Bits

·       Driving Method    : 1/16 Duty, 1/5 Bias

·       Viewing Direction : 6 O’clock

·       Backlight  : LED (WHITE)

Additional Information:

• Item Code: RG2004_WHITE

Product Details:

Graphic LCD display module with 128x64 resolution with Green/Blue colours. We can display Pie chart, Bar chart or to display any image. These displays used in Water ATM machines, Data loggers, Data scanners, Weighing machines etc

Additional Information:

• Item Code: RG12864-Display-D1-small

Product Details:

The features of LCD are as follows:

 

·       Display mode: STN /GREEN, NEGATIVE, TRANSMISSIVE

·       Display Format: 20 (characters) ×4 (line)

·       * IC: Aip31068

·       Drive Voltage: 5.0V

·       Driving Method: 1/32 Duty, 1/5 Bias, VO /VOUT

·       Operating Temperature: -20-70℃

Storage Temperature: -30-80℃

·       Viewing Direction           : 6 0’clock

·       Backlight: LED (BLACK) IF= 20×6 MA

Additional Information:

• Item Code: RG2004_Display_Green_I2C_Inbuild

Product Details:

The features of LCD are as follows:

• Display mode: STN /GREEN, NEGATIVE, TRANSMISSIVE
• Colour:
  - Display dot : BLACK
  - Background: GREEN
• Display Format: 128 (characters) × 64 (line)
• * IC: ST7920 ST7921
• Interface Input Data : 8 Bits
• Driving Method: 1/65 Duty, 1/9 Bias
• Viewing Direction : 6 O’clock
• Backlight: LED (WHITE)

Additional Information:

• Item Code: RG12864-Serial-Interface-GREEN

Product Details:

The I2C is a type of serial bus , which uses two bidirectional lines, called SDA (Serial Data Line) and SCL (Serial Clock Line). Both must be connected via pulled-up resistors. The usage voltages are standard as 5V and 3.3V.

If you already have the I2C adapter soldered onto the board, the wiring is quite easy. You should usually have only four pins to hook up. VCC and GND of course. The LCD display works with 5 Volts. So we go for the 5V Pin.

Additional Information:

• Item Code: RG1602-Green-with-i2c

Product Details:

The 1.8" ST7735 SPI TFT LCD Display Module is a compact and vibrant screen ideal for embedded projects, Arduino-based displays, and portable devices. It offers a resolution of 128×160 pixels and communicates via a 4-wire SPI interface, making it compatible with most microcontrollers and development boards.