Product Details:
Minimum Order Quantity | 1 Piece |
Low power consumption | 0.04W during normal operation |
Driver IC | SSD1306 |
No font | The software takes word modulo |
Interface | VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Dat |
Viewing angle | Greater than 160 degrees |
Supported platforms | For arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips |
Support wide voltage | 3.3V-5V DC |
Communication | IIC, only two I / O ports |
Back light | OLED self light, no backlight |
This is a 0.96 inch white OLED display (Yellow- Blue) module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header presoldered to board.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Character color | Blue |
Backlight | OLED self light, no backlight |
Driver IC | SSD1306 |
Viewing angle | Greater than 160 degrees |
Supported platforms | For arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips |
Pixel Resolution | 128x64 |
Background color | Black |
Interface | VCC: 3.3-5V GND: Ground SCL: Serial Clock SDA: Serial Dat |
No font | The software takes word modulo |
Support wide voltage | 3.3V-5V DC |
Low power consumption | 0.04W during normal operation |
0.96 inch 128x64 OLED Display Module - Blue Color offers 128×64 pixel resolution.
They are featuring much less thickness than LCD displays with good brightness and also produce better and true colors. OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s.Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Defaulting I2C address | 0x3C |
Display size | 0.91 Inch |
Color | White |
Operating temperature range | -40 degree C - +80 degree C |
Pixels | 128x32 |
Supply voltage | 3.3V-5V |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Product Name | 1.3 Inch blue oled display module |
Interface | IIC |
Pins | 4P |
Storage temperature | -40~80 Degree C |
Display Size | 1.3 Inch |
Color | Blue |
Driver IC | SSD1306 |
Operating Temperature | -30~70 Degree C |
Resolution | 128x64 |
OLED 1.3 inch is a monochrome graphic display module with a built-in 1.3 inch, 128X64 high-resolution display. OLED 1.3 inch is able to work despite the absence of backlight. In a dark environment, contrast of OLED display is higher than LCD display. This device is I^2C or SPI compatible. Due to its capability in displaying, it is often used in various application for instances, smart watch, MP3, function cellphone, portable health device and many others.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Display Size | 1.3 Inch |
Text Color | White |
Resolution | 128x64 |
Driver IC | SH1106 |
Input Voltage | 3.3V/5V |
This 1.3″ I2C OLED Display is an OLED monochrome 128×64 dot matrix display module with I2C Interface. It is perfect when you need an ultra-small display. Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino.
OLED 1.3 inch is a monochrome graphic display module with a built-in 1.3 inch, 128X64 high-resolution display. OLED 1.3 inch is in a position to figure despite the absence of backlight. In a dark environment, contrast of OLED display is above LCD display. This device is I^2C or SPI compatible. Due to its capability in displaying, it's often utilized in various application for instances, smart watch, MP3, function cellphone, portable health device and lots of othersAdditional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Pixel Color | Blue (128x48 pixels) |
Working temperature | -30 DegreeC ~ 70 DegreeC |
OLED Driver IC | SSD1306 |
Resolution | 128x64 |
Visual Angle | >160 Degree |
Input Voltage | 3.3V ~ 6V |
Compatible I/O Level | 3.3V, 5V |
Mini Size | 2.7 x 2.8cm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Compatible I/O Level | 3.3V, 5V |
Pixel Color | White (128x48 pixels) |
Working temperature | -30 DegreeC ~ 70 DegreeC |
Module volume ( generous ) | 27.0 x 27.0 x 4.1mm |
OLED Driver IC | SSD1306 |
Resolution | 128 x 64 |
Visual Angle | >160 Degree |
Input Voltage | 3.3V ~ 6V |
Mini Size | 2.7 x 2.8cm |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Input Voltage | 3.3V ~ 6V |
Compatible I/O Level | 3.3V, 5V |
Mini Size | 2.7 x 2.8cm |
Pixel Color | Yellow (Top 128x16 Pixels) & Blue (128x48 pixels) |
Working temperature | -30 DegreeC ~ 70 DegreeC |
OLED Driver IC | SSD1306 |
Resolution | 128 x 64 |
Visual Angle | >160 Degree |
This is a 0.96 inch Yellow BlueOLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board, display, 6 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Display Type | OLED |
Display size | 1.3 Inch |
Visual Angle | >160 Degree |
Working voltage | 3.3V |
Resolution | 128 x 64 |
Applkication | Consumer electronics, Smartwatch, mobile phone, and MP3 displays. |
Control Chip | SSH1106 |
Interface modes | SPI |
Pixel Color | Blue (Top 128x16 Pixels), White (Bottom 128x48 Pixels) |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Resolution | 128 x 64 |
Color | White |
Angle of view | >160 Degree |
Display color | Blue / Yellow Blue/ White |
Display Dimension | 0.96 Inch |
Interface | I2C (3.3V logic level)128 x 64 |
Operating Temperature | -20 ~ 70 Deg C |
Power Supply | 3.3 V~5 VDC |
This is a 0.96 inch white OLED display module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128x64. The package includes display board,display, 4 pin male header presoldered to board.
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays.
Product Details:
Minimum Order Quantity | 1 Piece |
Display Type | OLED |
Model Name/Number | oled-7pin-2.42Inch |
Pixel Color | Blue (Top 128x16 Pixels) , White (Bottom 128x48 Pixels) |
Pixels | 128x64 |
Storage temperature | -30 DegreeC ~ +80 DegreeC |
Power requirement | Low |
Operating Temperature ( DegreeC) | -20 DegreeC ~ +70 DegreeC |
OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s. The most attractive thing about using the OLED displays is that they do not need a backlight like conventional LCD/LED screens. The organic material itself has a property known as Electroluminescence (EL), which causes the material to “glow” when stimulated by a current or an electric field. Best energy saving displays ever!!! This 2.42″ OLED 7 Pin Display Module offers 128×64-pixel resolution. They are featuring much less thickness than LCD displays with good brightness and produce better and true colors. This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C (also called as IIC) serial or SPI interface.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Pixels | 128x32 |
Display size | 0.91 Inch |
Operating temperature range | -40 degree C - +80 degree C |
Defaulting I2C address | 0x3C |
Color | Blue |
Supply voltage | 3.3V-5V |
In contrast to LCD technology, Organic Light-Emitting Diode (OLED) displays do not require a backlight and are regarded as the ultimate technology for the next generation of flat panel displays.
OLED displays are composed of a thin, multi-layered organic film placed between an anode and cathode, which are made up of electric conductive transparent Indium Tin Oxide.
The multi-layered organic film includes a Hole Transporting Layer, Emission Layer and Electron Transporting Layer.
By applying an appropriate electrical voltage, the holes and electrons are injected into the Emission Layer from the anode and cathode respectively and combine to form excitons, after which electroluminescence occurs.
This 0.91” 128*32 Blue OLED Module offers 128*32-pixel resolution. They are featuring much less thickness than LCD Displays with good brightness and produce better and true colors.
This OLED Display Module is very compact and will add a great ever user interface experience to your Arduino project. The connection of this display with Arduino is made through the I2C (also called as IIC) serial interface.
The 0.91” 128*32 Blue OLED Display Module produces blue text on black background with very good contrast when supplied with 3.3V-5V Supply. The OLED Display Modules also offers a very wide viewing angle.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Mini Size | 2.7 x 2.8Cm |
Resolution | 128 x 64 |
Working temperature | -30 DegreeC ~ 70 DegreeC |
Pixel Color | Blue |
Module volume ( generous ) | 27.0 x 27.0 x 4.1Mm |
Visual Angle | >160 Degree |
Compatible I/O Level | 3.3V,5V |
Input Voltage | 3.3V ~ 6V |
OLED Driver IC | SSD1306 |
Features:
Applications:
Additional Information: