Water Float Sensors

Product Details:

• Used Medium: Water or liquid that has no damage to the float  , 0~60oC
• Switching Power:10W, Normally Open,(No).
• Voltage/ Electric Current: Below DC110V,≤0.5A
• Rated Voltage: ≤DC24V(For high voltage use, access intermediate relay)
• Insulation Resistor: 108 Ω
• Switching Life: 108 times
• Switching Response Time: 0.2 ms
• Fix Screw: M10, Floating Diameter Ø17mm.
• Installation Method: Side Mounting, Vertical Entry 34mm.
• Custom Made: Wire Harness Specification, Switching power.

Product Details:

A Float Valve Stainless Steel is a mechanical device used to regulate the flow of liquid in various systems, ensuring that the liquid level remains within a desired range. Typically made of stainless steel, this type of valve is highly durable, resistant to corrosion, and suitable for a variety of industrial, commercial, and domestic applications. The valve uses a buoyant float that rises and falls with the liquid level, automatically adjusting the valve's opening and closing mechanism to maintain the proper liquid level.

Key Features:

1. Stainless Steel Construction:

   • Made from high-quality stainless steel, the float valve is resistant to corrosion, rust, and wear, ensuring a long lifespan even in harsh environments like wastewater treatment, industrial applications, or outdoor water tanks.
   • The stainless steel material also provides strength and reliability, making it suitable for both low and high-pressure applications.

2. Automatic Operation:

   • The float valve operates automatically in response to changes in liquid levels. As the liquid rises, the float rises with it and eventually triggers the valve to shut off the flow. Similarly, when the liquid level drops, the valve opens to allow more liquid to flow into the tank or system.

3. Reliable Flow Regulation:

   • This valve ensures precise control over the liquid flow, maintaining the water level within a specified range without manual intervention.
   • It is particularly useful in systems where manual monitoring and control of fluid levels would be impractical or time-consuming.

4. Wide Application Range:

   • Water Tanks: To maintain the water level in tanks and prevent overflows.
   • Agriculture: Used in irrigation systems to regulate water levels.
   • Industrial Systems: Ensures consistent fluid levels in reservoirs, chemical tanks, and cooling systems.
   • HVAC Systems: Controls water levels in evaporative cooling systems or heating systems.
   • Swimming Pools: Used in pool water circulation systems to control water levels.

5. Durability and Longevity:

   • Stainless steel construction makes the valve highly resistant to environmental elements, such as heat, UV rays, and chemicals, allowing it to perform reliably for years without significant wear.
   • It is ideal for both indoor and outdoor applications where exposure to water or harsh conditions is frequent.

6. Low Maintenance:

   • The design of the float valve is typically simple, with fewer moving parts, making it easy to maintain. Regular checks to ensure the float is not obstructed or damaged are usually all that’s needed to keep it functioning well.

7. Customizable Sizes and Designs:

   • Float valves come in a variety of sizes to accommodate different tank or system volumes. Whether for small domestic water tanks or large industrial reservoirs, there’s a float valve design suited for the application.
   • The stainless steel body can be designed for various mounting configurations, such as side-mounted, top-mounted, or bottom-mounted, depending on system requirements.

8. Flow Rate Control:

   • These valves can be designed to handle a wide range of flow rates, from slow, controlled fill rates to fast inflows, ensuring they can adapt to different system demands.

9. Energy Efficient:

   • Since float valves operate automatically based on fluid levels, they help in conserving energy by eliminating the need for manual intervention or electronic systems to regulate fluid levels.

Product Details:

Plastic PP material, switching signal,apply to water dispenser,humidifier,water air conditioning, air conditioning fan etc.

• Used medium: Water or liquid that has no damage to the float,0- 60
• Voltage/electric current: Below DC110V,<0.5A
• Custom-made: Wire harness specification, dimension of float, warning point, switching power

Additional Information:

• Item Code: SEN-PPI35

Product Details:

Floating Ball ValveAutomatic Float Valve Water Level Control Valve F/ Water Tank Water TowerVertical interior Valve G25 

Description:

This valve is the replacement of the traditionalfloat ballcock, which can be applied to various systems of high water tanks,pools, water towers of the industry and civil construction, etc.

• Automatic control, low self-complementary water,water full automatic stop
• Four intakes, large volume of water
• Beautiful appearance, small size, practical,simple installation 
• Without electricity, easy to use, long life, lowfailure rate, saving water resources

 

When the pool or tank water levels fall, thevalve body will sink down and then the forerunner of the control valve will beopened. As the pipe water pressure affects, the seal face of control valve willbe opened. Finally the water comes out and vice versa

 

Note:

This production belongs to the liquid levelcontrol valves. When installed, the float must be vertical. if you need toinstall from the top , a Elbow needed to connect the float valve and the inletline. Firstly, the feed line should be fixed in horizontal plane and thenconnect the automatic water level control valve on the water inlet according tothe standard. The main water inlet should be lined with the control valves'Normal Diameter. When using, the globe valve should be all open. If two valvesare installed in the same pool, the two valves should be held in the samehorizontal plane. Before installing, please clean the impurities in the pipesin case of blocking.

If the water quality is not good, then thevalves need to be maintained properly.

If the users find the time of adding waterbecomes longer, he can just upload the water inlet and make it washed

 

Note:

Please allow 1-2mm error due to manualmeasurement. Please make sure you do not mind before you bid

Due to the difference between differentmonitors, the picture may not reflect the actual color of the item. Thank you!

Product Details:

Plastic PP material, switching signal,apply to water dispenser,humidifier,water air conditioning, air conditioning fan etc.

Technical parameter:

• Used medium: Water or liquid that has no damage to the float,0- 60 Deg C
• Voltage/electric current: DC2000V,<0.5A
• Custom-made: Wire harness specification, dimension of float, warning point, switching power

 

 

Additional Information:

• Item Code: SEN-PPI150

Product Details:

The Saier SEN-WSK1810AN is a photoelectric proximity sensor designed for industrial applications requiring precise object detection. This sensor utilizes infrared (IR) diffusion reflection technology to detect the presence or absence of objects without physical contact, enhancing reliability and reducing mechanical wear

Product Details:

This valve is the replacementof the traditional float ballcock, which can be applied to various systems ofhigh water tanks, pools, water towers of the industry and civil construction,etc.

 

Technical Parameters:

• The use of siphonwater supply needs to ensure that the water level drop is greater than 80 cm,otherwise it will affect the water output.

• If two valves areinstalled in the same tank, they should be kept on the same level.

 

Advantage:

• Fully automaticcontrol, water less self-replenishment, water full stop.
• Low water qualityrequirements, 6 points of water inlet, and large amount of water.
• Beautiful appearance,small size, practicality, simple installation.
• No need forelectricity, easy to use, long life, low failure rate, saving water resources

 

The float valve is divided into 4 types, and the diameter of thepipe is only a 6-point adapter on the original basis.

The Saier SEN-PPI35:PP is a high-precision water float sensor designed for reliable liquid level detection in various applications. Utilizing a reed switch mechanism, this sensor offers accurate and durable performance, making it ideal for use in water dispensers, humidifiers, air conditioning systems, and other liquid level monitoring systems

Product Details:

The ADIY Uno R3 CH340C ATmega328P Development Board is the low-cost version of the popular UNO R3 Arduino. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

Additional Information:

• Item Code: ADIY-Uno-DIP-R3-Compatible-CH340C